气动锚杆钻机说明书.docx

. .可修编. . .可修编. 摘要 目前，国生产的锚杆钻机无论从技术上还是质量上都落后于某些兴旺国家，所以对锚杆钻 机的理论研究尚需进一步深化，钻机的质量需进一步提高。 本文全面、系统、深入地分析了气动锚杆钻机的工作原理、齿轮马达运动的特性，对 气动锚杆钻机组成元件进展设计分析，提出气动锚杆钻机设计的根本思路和方法，并对气 动锚杆钻机的回转局部进展了详细的设计校核，利用PROE对其进展建模和仿真。 本文根据流体力学和气压传动原理，分析了齿轮式气动马达的构造和特点，本文还分析了 气动式锚杆钻机产生噪声、油雾的机理，探讨了消除噪声和油雾的途径和方法，研制了具 有消除排气油雰和减小噪声双重功能的多机理除油雰消音器，消音器性能良好，能很好地 满足设计要求和使用要求。 关键词:气动锚杆钻机、齿轮马达、回转局部、强度校核、消音器、支腿、操纵臂、建模、 仿真 2.3性能参数指标 2.3性能参数指标12 .可修编. 2.3性能参数指标 2.3性能参数指标12 .可修编. 町 町修编. ABSTRACT At present, the domestic production of the jumbolter no matter from technology and quality are behind some developed countries, so the jumbolter to the study of the theory of the pending further deepening, the quality of the drilling rig to further improve This paper; system, a further study on the working principle of the jumbolter pneumatic, gear motor sports characteristics, the jumbolter to pneumatic ponents design analysis, it puts forward the jumbolter pneumatic design basic idea and method, and the jumbolter to pneumatic rotating parts of detailed design respectively；Using PROE the modeling and simulation. In this paper, according to the principle of fluid mechanics and pneumatic transmission, this paper analyzes the gear type structure and characteristics of the pneumatic motor, this paper also analyzes the pneumatic type the jumbolter to produce noise, the mechanism of oil mist, and probes into the oil mist eliminate noise and the way and the method, developed with dispels exhaust oil mist and reduce the noise of the double function mechanism in addition to more oil mist mu仟ler, muffler performance is good, can well meet the design requirement and the use requirement. Key words: Pneumatic anchor rig Gear motor Rotary body Strength check Muffler outrigger Manipulating arm modeling simulation 目录 摘要I ABSTRACTII 第一章绪论1 1锚杆钻机简介1 1.1锚杆支护的作用及意义1 1.2锚杆钻机的开展与现状2 1.3我国煤矿用锚杆钻孔设备存在的主要技术问题3 1.4本课题研究的主要容5 第二章气动锚杆钻机总体方案的研究与设计6 2.1设计方案确实定6 2.1.1推进方案确实定6 2.1.2动力机构方案确实定7 2.1.3操纵机构方案确实定10 T作原理12 . .可修编. . . .可修编. 5.1.1适用围简介 5.1.1适用围