欧姆龙NJ用户手册SYSMAC STUDIO PROJECT VERSION CONTROL FUNCTION OPERATION MANUAL.pdf

Automation Software Sysmac Studio Project Version Control Function Operation Manual SYSMAC-SE2 SYSMAC-TA4L W589-E1-03 NOTE All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form, or by any means, mechanical, electronic, photocopying, recording, or otherwise, without the prior written permission of OMRON. No patent liability is assumed with respect to the use of the information contained herein. Moreover, because OMRON is constantly striving to improve its high-quality products, the information contained in this manual is subject to change without notice. Every precaution has been taken in the preparation of this manual. Neverthe- less, OMRON assumes no responsibility for errors or omissions. Neither is any liability assumed for damages resulting from the use of the information contained in this publication. Trademarks • Sysmac and SYSMAC are trademarks or registered trademarks of OMRON Corporation in Japan and other countries for OMRON factory automation products. • Microsoft, Windows, Excel, and Visual Basic are either registered trademarks or trademarks of Microsoft Corpora- tion in the United States and other countries. • EtherCAT® is registered trademark and patented technology, licensed by Beckhoff Automation GmbH, Germany. • ODVA, CIP, CompoNet, DeviceNet, and EtherNet/IP are trademarks of ODVA. • The SD and SDHC logos are trademarks of SD-3C, LLC. • NVIDIA, the NVIDIA logo, GeForce, and the GeForce logo are the trademarks or registered trademarks of NVIDIA Corporation in the USA and other countries. • ATITM , RadeonTM is a trademark of Advanced Micro Devices, Inc.. • Celeron, Intel and Intel Core are trademarks of Intel Corporation in the U.S. and / or other countries. • Git and the Git logo are either registered trademarks or trademarks of Software Freedom Conservancy, Inc.,