钢绞线力学性能表.docxVIP

钢绞线力学性能表 钢绞线力学性能表 钢绞线力学性能表 1、钢绞线镀锌力学性能表 钢丝 钢绞线 公称抗拉强度级 直径 直径 所有钢丝断面积 Grade of nominal strength (/MPa) 参照重量 Reference 构造 Diameter Diameter Cross section of 1270 1370 1470 1570 weight Construction of steel of steel steel strand 钢丝破断拉力总和不小于 (kg/100m) wire strand 2 The aggregate breaking force is not less (mm) (mm) (mm) than(kN) 1X3 1X7 1X19 1X37 钢绞线中镀锌钢丝力学性能表 扭转次数次 /360 o 钢丝直径 伸长率 Torsions/360 o 直径同意 公称抗拉强度 Diameter Elongation L=100d 误差 Norminal tensile of steel (L 0=200mm) 抗拉强度 Tensile strength(MPa) Tolerance strength(MPa) wire (%) 1370 1270 1570 1470 (mm) 不小于 Not less than 不小于 Not less than ± 18 16 14 ± 1270 1370 1470 1570 16 14 12 ± ± 14 12 10 钢绞线中镀锌钢丝锌层性能表 Property of Zinc Coating of Zinc-Plated Steel Wire in Strand 锌层重量不小于 Weight of zine coatingnot less 环绕试验芯杆直径为钢丝直径倍数 钢丝直径 than Coiling test muitiple of core rod diameter to steel wire Diameter of steel wire(mm) (g/m 2) diameter 特A A B 180 160 110 12 180 160 110 200 160 130 200 180 130 220 180 160 230 200 160 230 200 180 250 220 200 270 250 230 14 280 260 230 290 270 250 290 270 250 2、无粘结钢绞线 UNBONDED STRAND WIRE 注： (1) 力学性能应切合 PC钢绞线标准要求 依据不一样用途，经两方协议，供给其余强度和直径的预应钢绞线。 Note:(1) Mechanical performance should conform to the specification of PCstranded wire According to different uses,we can supply PC stranded wire with the other tensile strength and diameter through negotiation by both parties. 1x7 高密度聚乙烯护 防腐润滑脂重量大于 套厚度 Corrosion resstant High density 1000h 松驰值 % 规格 抗拉强度 折服负荷 弹性模量 lubricating grease polythene ( 初始负荷为 70%破 履行标准 r(mm) Mpa KN 2 N/mm weight bushing 断负荷 ) 不大于 more than(g/m) thickness (mm) 建筑行业标准 JG3006-93 ￠ 1570 119.17* 43 5 （钢绞线） ￠ 1470 174.93* 50 （PC Stranded wire) 注：(1) * 指折服负荷是整根钢绞线破断负荷的 85% 依据不一样用途，经两方协议，供给其余强度和直径的预应力钢材。 Note: (1) *indicating Yielding Load takes 85% of the breaking load of the whole strand wire (2) As agreed by both Parties, supply prestressing steel of other strength and dimension upon its purpose. 3、预应力混凝土用钢绞线 TYRE BEAD WIRE GB/T5224-2003 ASTMA416/A416M-2002 BS5896-1980 合用于由圆形