Danfoss丹佛斯APP柱塞泵的止回阀VCM22技术资料.pdf

Data Sheet Non return valve VCM 22 2” Vic. outlet Data Sheet | Non return valve VCM 22 Introduction The function of the non-return valve to be mounted directly on the outlet of the APP pump is to protect the pump by allowing flow out of the pump while blocking flow into the pump. The valve incorporates a conical poppet design, which ensures sealing when used with a low viscosity medium such as water. Typically used in connection with APP 21 - 30 and APP 22 pumps. Features The non-return valve is produced in stainless Super Duplex W. Nr. 1.4410. The connection sealing is an O-ring made of Viton. The valve is available for flows up to 22 m3/h or 370 l/min (97 gpm). Technical data and code numbers Max. Flow Opening Pressure loss Inlet Outlet Code Type pressure continuously pressure at max. flow connection connection number bar (psi) l/min (gpm) bar (psi) bar (psi) M52 x 1,5 VCM 22 80 (1160) 370 (97) 0.3 (4.3) 0.5 (7.3) Vic. 2” 180H0256 (63mm) Filtration The fluid must be clean and free from abrasive sediments. 2 | © Danfoss | DCS (im) 2019.09