3D伪全息投影仪研制.pdfVIP

Optoelectronics 光电子, 2018, 8(2), 42-50 Published Online June 2018 in Hans. /journal/oe /10.12677/oe.2018.82007 Design of 3D Pseudo Hologram Projector Fanlin Duan, Lei Chen, Chi Liu, Zhichao Wu College of Opto Electronic Engineering, Xi’an Technological University, Xi’an Shaanxi nd th th Received: May 22 , 2018; accepted: Jun. 6 , 2018; published: Jun. 14 , 2018 Abstract 3D pseudo-holographic projection is a widely used holographic display technology. In this paper, the single-signal LED display is used to project the three-dimensional projection source animation into a regular quadrangular pyramid-shaped transparent PVC sheet. The principle of optical cata- dioptric reflection presents a virtual three-dimensional animated illusion in a regular quadran- gular pyramid. The video animation with lighting effects and storylines was designed using ani- mation modeling software and video processing software. The image space of 68.5 mm, high 50 mm and four-pyramid is made, and the development of a projector device with a size of 135 mm × 100 mm × 55 mm is completed. The imaging effect and visibility range of the phantom were expe- rimentation. It was found that when the LED display light intensity was 632Lux and the horizontal viewing angle was between 60 degrees and 120 degrees, a clear and controllable 3D animation projection with dynamic contrast of 1606:1 could be observed. The device has a low cost and small size, and has a strong sense of space, perspective and technology. Keywords Holographic 3D Projection, 3D Projection Source, 3D Animation Display 3D伪全息投影仪的研制 段帆琳，陈 磊，刘 池，武志超 西安工业大学光电工程学院，陕西 西安 收稿日期：2018年5月22 日；录