数控机床三维建模与设计学习资料.pdf

数 控 机 床 三 维 建 模 与 设 计 数控机床三维建模与设计 摘 要 数控车床是装有数字程序控制系统的自动化车床。其通过数字化信号由伺服系统 对机床运动及加工过程进行控制，最终实现车床自动完成对零件的加工。与其他控制 相比，数控的最大特点是运动的执行与程序的编制相互独立。其集中了自动化机床、 精密机床和通用机床的优点，具有高效率、高质量和高柔性的特点。 计算机建模技术将机械设计的参数化应用于数控机床的设计与研究，以提高机床 产品的质量，加快数控机床的更新换代。在传统机械设计的基础上，使用功能强大的 Pro/e工程建模软件建立数控机床主轴部件的实体模型，并模拟机床主轴部件的装配 过程、主传动、换刀运动等过程，使设计者在制造样机之前，及时发现设计过程中潜 在的缺陷，为下一步的设计提供良好的条件。 关键字： 计算机建模，参数化，数控机床，主轴部件，装配过程，主传动，换刀 运动 NUMERICAL CONTROL MACHINE THREE DIMENSIONAL MODELLING AND DESIGN ABSTRACT Numerical control (NC) lathe is an automatic lathe that installed numerical program control system. It transmits numerical signal to control the machine tool’s movement and machining process by servo system, eventually realizes that it automatically completes to processing of parts. With NC’s biggest characteristics that other control compare, Discharge movement and program mutually independent. It collects the advantages of automatic machine tools, precise machine tools and general purpose machine tools, having the characters of high-efficiency, high-quality and high-flexibility. The calculator is set up the mold technique to turn the parameter that the machine design to apply in the design and researches that the number control the tool machine, with the quantity of the exaltation tool machine product, the renewal that speeds number to control the tool machine changes the generation. On the foundation that the traditional machine design, the strong engineering of Pro/ e of the usage function sets up the entity model that the mold software builds up number to control the tool machine principal axis parts, and imitate the assemble process, lord of the tool machine principal axis parts to spread to move, change the knife the sport etc. process, make design is before