毕业设计论文_基于单片机的红外遥控器设计.pdfVIP

基于单片机的红外遥控器设计 摘要：随着电子技术的发展， 家用电器种类的增加和无线遥控产品的普及， 红外遥控器的使用越来越频繁。本设计主要应用了 AT89S52型单片机作为核心， 综合运用了单片机中断系统、定时器、计数器等知识，应用红外光波长短、抗干 扰、工作可靠性高的优点。 该设计主要包括红外发射和红外接收模块， 然后分别 对这两个模块进行软件的编程。 对于遥控操作的不同， 遥控发射模块通过对红外 光发射频率的控制来区别不同的操作， 遥控接收模块通过对红外光接收频率的识 别，判断出控制操作，来完成整个红外发射、接收过程 [1] 。如今，由于嵌入式的 广泛应用，促进了新一代红外遥控器的发展， 将微型计算机芯片融入到遥控器中， 使之使用更加方便快捷， 也使人们的生活简易化。 随着时代的进步， 人们对生活 物品的要求也越来越高， 为了满足消费者的需求， 所以将先进的单片机加入到家 庭中的电器遥控器中是符合大众要求的。 关键词： 遥控器；红外发射；红外接收；单片机 The Design of Infrared Remote Controller Based on Single-chip Computer 矚慫润厲钐瘗睞枥庑赖。 Abstract ：With the development of electronic technology, increase in the consumer electronics category and the popularity of wireless remote control products, IR remote control used with increasing frequency. This design mainly using AT89S52 microcontroller core, integrated application of a microcontroller interrupt systems, timers, counters, and other knowledge, using infrared light wave lengths and interference, the advantages of high reliability.The design includes infrared and infrared receiver module, and software programming for these two modules .For remote control of different remote control transmitter module through the infrared light emitting frequency control to distinguish between different actions, remote control receiver modules through the receiving frequency of the infrared light to 江苏理工学院毕业设计说明书（论文） identify, determine control operation, to complete the IR transmitter and receiver process. Now, with the wide range of embedded applications, promote the development of a new generation of infrared remote controls. Micro-chip into the remote control, making it easier and faster, leaving pe