_IE工业工程_DANIELI高速切边机技术合同中英文对照.docx

（IE 工业工程）DANIELI 高速 切边机技术合同中英文对照 （IE 工业工程）DANIELI 高速 切边机技术合同中英文对照 The Technical Contract of The high slitting line 高速切边机技术合同 2008 年 11 月 APPENDIX 2.1 Design basis data 附件 2.1 设计参数 2.1 DESIGN BASIS 2.1.1 MATERIAL-SPECIFIC DATA Alloys to be processed Material: Aluminum alloys Aluminum and its alloys: series 1xxx, 3xxx, 5xxx and 8xxx Material condition: strip in dry condition; with a maximum of 50 mg/m2 each side of rolling oil on the surface; Temper: Soft (O) – Hard (H19) Tensile strength: 80 … 450 N/mm2 Yield strength: 30 … 350 N/mm2 Elongation: 5 % The coils to be processed on the lines sho