机械密封培训.pptxVIP

西部管道密封培训;培训内容概述;;;;;;;;Simply put, a mechanical seal is:简单的说,机械密封就是:;;;Process Fluid Acts as Lubricant Between Faces流体在两个面之间充当润滑剂的过程;;;;;Primary Seal: Flush基本密封:冲洗;Primary Seal: Flush基本密封:冲洗;Primary Seal: Quench 基本密封:急冷;API Piping Plans API 冲洗方案 第二部分;API Piping Plans API 冲洗方案;Integral (internal) recirculation from pump discharge to seal 内部循环从泵的出口到密封;;;Recirculation from seal chamber through a flow control orifice and back to pump suction从密封腔里出通过一个孔板返回到泵的入口;;Recirculation from pump discharge through a flow control orifice and cooler to seal Open Loop Cooling Circuit;Recirculation from a pumping ring in the seal chamber through cooler and back to seal Closed Loop Cooling Circuit 冲洗液通过密封腔中的泵效环从密封腔中流出经过换热器，再返回到密封中，形成自封闭循环。形成封闭的冷却回路 ;;Recirculation from pump discharge through a cyclone separator delivering clean fluid to the seal and fluid with solids back to pump suction line冲洗液从泵出口流出，通过一旋液分离器，使干净流体进入 密封腔，带有颗粒的流体返回到泵入口处形成封闭循环;;Recirculation from pump discharge through a cyclone separator delivering clean fluid through a cooler and then to seal and fluid with solids back to pump suction line;;; A fluid used as a lubricant or buffer between dual mechanical seals. 这种液体象缓冲剂，润滑剂用在双机械密封 The buffer fluid is always at a pressure lower than the pump process pressure being sealed.缓冲液的压力通常低于被密封的介质的压力 ;;;;;Safe to use, handle, store储藏、操作、使用安全可靠 Stable liquid at ambient temperatures在室温下，性能稳定 Not a VOC, VHAP or other regulated compound 不易挥发、非有毒物质 Non flammable不易燃烧 Non foaming when pressurised高于常压时，不易起泡 Clean and good lubricity干净且有较好的润滑性 Compatible with process fluid与工艺流体有互容性 Compatible with seal materials与密封材料相一致 Good heat transfer properties有好的传热性能 Good flow qualities at very low temperatures 在低温下，有好的流动性 Low solubility of gas对气体有较低的溶解性 Local availability当地容易获得 Low cost成本低 ;Tapped connections for the purchaser’s use 在接口处攻螺纹，以方便用户使用 ;;;;;; Plan 53c (A.4.12);Barrier Fluid Temperature (7.3.4.1.1)隔离流体温度;Plan 11 with Plan 53;;;;;密封安装 第三部分;密封系统的运行及其可靠性受密封安装公差的影响。应保证密封安装公差不超过所要求的