雅马哈LP-3英文说明书.pdf

LP-3 Assembly Instructions 4 Attach the braces. CAUTION 1 Attach the braces to the center of the upper beam using • Be careful not to confuse parts, and be sure to install all parts the short screws (B). Do not tighten the screws yet. in the correct direction. Please assemble in accordance with (B) the sequence given below. • Assembly should be carried out by at least two persons. Correct • Be sure to use the correct screw size, as indicated below. Use tightenning of incorrect screws can cause damage. • Be sure to tighten up all screws upon completing assembly of (A) (A) Insufficient each unit. tightenning • To disassemble, reverse the assembly sequence given below. • If the main unit creaks or is otherwise unsteady when you play 2 Attach the stays to the side panels using the remaining on the keyboard, refer to the assembly diagrams and retighten long screws (A). Again, do not tighten the screws yet. all screws. 3 Tighten the screws when all four are in place. Assembly procedure