OSPF几种认证方式查看及调试命令.docxVIP

一、调试命令： showip protocols R2#show ip protocols Routing Protocol is ospf 1 //当前路由器运行的OSPF 进程ID Outgoing update filter list for all interfaces is not set Incoming update filter list for all interfaces is not set Router ID 2.2.2.2 //本路由器ID Number of areas in this router is 1. 1 normal 0 stub 0 nssa //本路由器参与的区域数量和类型Maximum path: 4 //支持等价路径最大数目Routing for Networks: 2.2.2.0 0.0.0.255 area 0 192.168.12.0 0.0.0.255 area 0 192.168.23.0 0.0.0.255 area 0 //以上四行表明OSPF 通告的网络以及这些网络所在的区域Reference bandwidth unit is 100 mbps //参考带宽为108 Routing Information Sources: Gateway Distance Last Update 4.4.4.4 110 00:08: