触摸屏生产流程介绍.ppt

* * * 触摸屏生产流程 Stack-up TP with SITO TP with DITO Sio2(500?) Raw glass ITO PI Metal Jumper trace Top Passivation layer FPC Shielding ITO OCA Cover Glass BM BM SiO2 ACF SITO Sio2(500?) Raw glass Front side ITO Metal trace SiO2 FPC Back side ITO OCA Cover Glass BM BM SiO2 ACF Passivation DITO #1 ITO Pattern SITO pattern Sio2(500?) Raw glass ITO PI Metal Jumper trace Top Passivation layer Shielding ITO SiO2 SITO #4 Top Passivation #2 PI #3 Metal Jumper #1 ITO Pattern #4 Top Passivation #2 PI #3 Metal Jumper O/S test Front side Metal sputter (for jumper trace) Incoming Raw glass Front ITO