50T汽车吊性能表.docVIP

50T汽车吊性能表 50T起重特性表 PATED LIFTING CAPACITY TABLE 单位(UNIT):Kg 工 作 主 臂 BOOM 主臂 主臂+副臂 BOOM+JIB 幅 度 仰角 支腿全伸、后方、侧方作业 40.2+9m 40.2+15m WORKING BOOM REARSIDE WORKING AREA WITH RADIUSANGLE OUTRIGGER FULLY EXTENDED (m) (?) 臂 长 BOOM LENGTH 副臂安装角 副臂安装角 JIB OFF SET JIB OFF SET 10.8m 18.15m 25.5m 32.85m 40.2m 3.0 60000 31000 0? 30? 0? 30? 3.5 50500 31000 80 4000 2150 2400 1000 4.0 43500 30000 21000 78 3800 2050 2180 1000 4.5 40000 28000 20000 76 3500 1950 1920 1000 5.0 36000 27000 19200 13800 74 3150 1900 1820 1000 5.5 31000 24600 19000 13800 72 2850 1850 1690 1000 6.0 25600 23200 18200 13800 70 2700 1800 1530 1000 6.5 22000 21000 17500 13600 68 2550 1750 1380 900 7.0 20000 18000 17100 13600 8500 66 2450 1650 1230 800 8.0 15300 14000 15500 12600 8500 64 2150 1400 1080 700 9.0 12100 11000 13000 11600 8200 62 1850 1150 950 600 10.0 9000 10800 10600 7800 60 1550 1000 830 11.0 7500 8800 9200 7400 58 1350 850 700 12.0 6500 7200 8200 7000 56 1100 700 600 13.0 5300 6000 7000 6600 54 950 550 14.0 4600 5200 6200 6200 52 750 15.0 3700 4300 5200 5300 50 16.0 3000 4000 4800 5000 18.0 3000 3800 4000 20.0 2100 3000 3200 22.0 1600 2300 2600 24.0 1800 2100 26.0 1400 1600 28.0 1200 说明(NOTE): , 表中的额定总起重量是起重机设置在坚固地面呈水平状态下的允许起吊重量，不允许在 不打支腿的情况下吊重。(Lifting capacities shown in the table are based the condition that the trane es set on firm ground horizontaily,lifting on wheels is prohibited.) , 表中所列数值为包括吊具在内的最大允许值(50吨主钩重505千克，副吊钩重量120 千克)。(Capacities listed in the table are max.permissible values including the slings(505kg main hookblock for 50t and 120kg auxiliary hoodblock).) , 表中红线上方的额定总起重量有起重机的结构强度所决定，其他由起重机整机稳定性而 确定。(Rated lifting capacities above the red line in the table are based on structure strength of the crane,the others,on stability.) , 使用臂端滑轮时，最大起重量不得超过单根钢丝绳允许起吊载荷4.2吨。(When the single tline.) , 打好第五支腿时，表中数值使用于圆周360?作业。(With the fifth outrigger fully extended,fuul 360?rotation is available according to the values listed in the above table.)