美国球阀厂家说明-73.pdf

Product Bulletin 377 Trip Valve 62.3:377 D200318X012 July 2018 ™ Fisher 377 Trip Valve Fisher 377 pressure‐sensing trip valves are for control applications where a specific valve/actuator action is required when supply pressure falls below a specific point. When supply pressure falls below the trip point (see figure 1), the trip valve causes the actuator to fail up, lock in the last position, or fail down. When the supply pressure rises above the trip point, the 377 trip valve automatically resets, allowing the system to return to normal operation. The trip valve can be top‐mounted on a manifold, yoke‐mounted, or bracket‐mounted to match the application requirements. 377 trip valves can be used with Fisher 480, 585C, 685, 1061, 1066, 1069, and Bettis G Series piston actuators. W4292‐1 Features  Cost Effective—Single trip valve construction reduces costs and spare part requirements of those systems using three separate switching valves to perform the failure functions. A single trip valve greatly simplifies piping requirements.   Ease of Mode Conversion—Conversion to any of the fail modes requires only minor hookup changes.  Adjustable Trip Valve—The trip point is adjustable for specific supply pressure requirements. W8435‐1   Reliable Operation—The trip valve design includes large diaphragm areas and few moving parts for Fisher 377 Trip Valve