原创力文档- 1、本文档共1页，可阅读全部内容。
- 2、原创力文档（book118）网站文档一经付费（服务费），不意味着购买了该文档的版权，仅供个人/单位学习、研究之用，不得用于商业用途，未经授权，严禁复制、发行、汇编、翻译或者网络传播等，侵权必究。
- 3、本站所有内容均由合作方或网友上传，本站不对文档的完整性、权威性及其观点立场正确性做任何保证或承诺！文档内容仅供研究参考，付费前请自行鉴别。如您付费，意味着您自己接受本站规则且自行承担风险，本站不退款、不进行额外附加服务；查看《如何避免下载的几个坑》。如果您已付费下载过本站文档，您可以点击 这里二次下载。
- 4、如文档侵犯商业秘密、侵犯著作权、侵犯人身权等，请点击“版权申诉”（推荐），也可以打举报电话：400-050-0827(电话支持时间：9:00-18:30)。
查看更多
Instruction Manual 377 Trip Valve
D200319X012 July 2018
Table 1. Specifications
Available Configurations Pressure Connections
377 Trip Valve: Includes check valve, but no volume 1/4 NPT internal
tank: user configured for locking position. For field
use or replacement. Temperature Capabilities(1)
When supply pressure falls below the trip point, Nitrile Diaphragms and O‐Rings: -40 to 82 C
377D Trip Valve: Fails actuator piston down. Includes (-40 to 180F)
check valve and volume tank. Fluorocarbon Diaphragms and O‐Rings: -18 to 104 C
377L Trip Valve: Locks actuator piston in the last (0 to 220F)
position.
377U Trip Valve: Fails actuator piston up. Includes Volume Tank Maximum Internal Working Pressure
check valve and volume tank. (for 377D, 377U, 377CW and 377CCW trip valves)
377CW Trip Valve: Fails fully clockwise to close valve.
Requires check valve and volume tank. Trip valve Standard: 10.3 bar (150 psig) for non‐ASME approved
moves piston to either up/down position and requires applications. See note on page 7.
actuator configuration for actual clockwise ASME Approved Applications: Rated 10.3 bar (150
movement. psig), maximum; 9.3 bar (135 psig), recommended.
377CCW Trip Valve: Fails fully counterclockwise to See note on page 7.
close valve. Requires che
文档评论（0）