FS4055B磷酸铁锂充电ic.PDFVIP

FS4055B   INTRODUCTION:  FEATURES: The FS4055B is a complete constant-current  Programmable Charge Current Up to 800mA constant-voltage linear charger for single cell  No External MOSFET, Sense Resistor or LiFePO4 batteries. It’s SOT package and low Blocking Diode Required external component count make the FS4055B  Charges Single Cell LiFePO4 Batteries especially well-suit for portable applications. Directly from USB Port Furthermore, theFS4055Bis specifically designed  Preset 3.6V Charge Voltage with ±1 .0% to work within USB Power specifications. Accuracy No external sense resistor is needed and no  Constant-Current/Constant-Voltage blocking diode is required due to internal MOSFET Operation with Thermal Regulation to architecture. Thermal feedback regulates the Maximize Charge Rate Without Risk of charge current to limit the die temperature. The Overheating charge voltage is fixed at 3.6V and the charge  Charge Status Output Pin current can be programmed externally with a  30μA Shutdown Current single resistor. The FS4055B automatically  70μA Standby Current terminates the charge cycle when the charge  Complete Linear Charger in SOT23-5 current drops to 1/10th the programmed value Package for Single Cell LiFePO4 Batteries after the final float voltage is reached. The  C/10 Charge Termination FS4055B automatically re-starts the charge if the  Soft-Start Limits Inrush Current battery voltage falls below an internal threshold.  Automatic Recharge