RS Components 电工电料 电源配件 G08-M02 使用说明.pdfVIP

Accessories Front Panels and DIN-Racks Front Panels Description Front panels are available for 19 DIN-rack mounting of 3 U cassette type power supplies in Schroff system version (Intermas system on request) and may be attached to the converter by means of countersunk screws. An assembly kit, consisting of a front panel and a support bracket, enables arrangement of two standard cassettes with up to six output voltages in 6 U configuration. All front panels are of colorless anodized aluminum and delivered with one or 2 grey plastic handles of 3 TE for easy pull-out and 2 or 4 hand-press insertable plastic retainers with captive screws for fixing to the rack. Note: Custom specific front panels are available on request. Dimensions according to DIN 41494-1 (IEC 60297): Width: 1 TE = 5.08 mm (0.20) Height: 1 U = 44.45 mm (1.750) Tolerances: ±0.2 mm, unless otherwise specified. Note: In Europa often HE instead of U is used. Schroff System for 3 U Rack Q-, P- Series Front Panels in 4, 5, or 6 TE 6.4 ±0.1 2.5±0.1 These front panels available in three versions and fit to all a DC-DC converters of the Q- and P-Series; see fig. 1 for the 2