RS Components 电工电料 通用外壳 03253000 使用说明.pdfVIP

Bopla Gehäuse Systeme GmbH | Borsigstr. 17-25, 32257 Bünde Tel.: +49 (0)5223 / 969 - 0 | E-Mail: info@bopla.de | Internet: www.bopla.de Euromas ABS / PC / F05 Enclosure, ABS T 253 Order no.: * = Available on request. Characteristics Dimensions Colour of enclosure group Dimensions Light grey 300 x 230 x 85 mm Protection class Product drawing IP 65 Enclosure Material ABS, PC (UV stabilised) and selected sizes in PC UL 94 V0 (additional UL 94 V0 versions on request), seal made of CR; V215: Vestamid, CR seal; for details see Technical Information Scope of delivery Lid and base, lid screws made of V2A, self-tapping screws for mounting bosses Note SV = version with quick-release fastener. IP = Ingress protection acc. to DIN EN 60529 Important! To compensate for pressure when temperatures change and cause moisture in the enclosure, we we recommend that you use a pressure compensation element. » Additional information Technical documentation / Downloads Technical drawings Product information 3D product data in STEP format: Registration necessary Euromas ABS PC GB.pdf (337.6 KB) 20.09.2019 Product drawing in PDF format:T-253.pdf (114.7 KB) Product drawing in DXF format:T-253.dxf (848.7 KB) Drawing for mechanical processing:T-253-G.dxf (391.6 KB) Milling contours are shown here as a DXF le. (Sub D, USB, HDMI, cable glands, ...) Works Test Certicates 670 WPZ-Euromas-PC DE.pdf (197.3 KB) 670 WPZ-Euromas-PC EN.pdf (191.1 KB) Matching accessories Mounting plates, laminated paper (Pertinax), galvanised steel for version 260 2200150