美国杜邦Zytel® ST801 NC010物性表.pdfVIP

Zytel® ST801 NC010 NYLON RESIN Common features of Zytel® nylon resin include mechanical and physical properties such as high mechanical strength, excellent balance of stiffness and toughness, good high temperature performance, good electrical and flammability properties, good abrasion and chemical resistance. In addition, Zytel® nylon resins are available in different modified and reinforced grades to create a wide range of products with tailored properties for specific processes and end-uses. Zytel® nylon resin, including most flame retardant grades, offer the ability to be coloured. The good melt stability of Zytel® nylon resin normally enables the recycling of properly handled production waste. If recycling is not possible, DuPont recommends, as the preferred option, incineration with energy recovery (-31kJ/g of base polymer) in appropriately equipped installations. For disposal, local regulations have to be observed. Zytel® nylon resin typically is used in demanding applications in the automotive, furniture, domestic appliances, sporting goods and construction industry. Zytel® ST801 NC010 is an Unreinforced, Super Toughened, Polyamide 66 Product information Resin Identification PA66-HI ISO 1043 Part Marking Code PA66-HI ISO 11469 ISO designation ISO 16396-PA66-I,,M1G1L1NR,S14-020 Rheological properties dry/cond. Molding shrinkage, parallel 1.8 /- % ISO 294-4, 2577 Molding shrinkage, normal 1.4 /- % ISO 294-4, 2577 Typical mechanical properties dry/co