RS Components 电工电料 电动机控制器 DCM-24-40 使用说明.pdfVIP

DC MOTOR CONTROLLER DCM MODULE X10335 INTRODUCTION This general purpose, modulated, pulse width, low voltage DC controller, can be operated in any of the following modes: Motor Control: High Frequency (RT/RT1 no link) speed control set by a 5K potentiometer. Lighting/Heating Control: Low frequency (RT/RT1 linked) output level set by a 5K potentiometer as above. Temperature Control: Thermistor connected across RT/RT 1, with a temperature range of 5-130 C. Temperature set by a 5K potentiometer. APPLICATIONS Include speed control of low voltage, high frequency, DC motors, low voltage lighting and medium frequency heaters. FEATURES RoHS Compliant Directive Manual or signal control 2002/95/EC Temperature control with optional sensor 180 or 350Hz selectable frequency ranges Short circuit protection 6 to 24v DC supply voltage range. INSTALLATION INSTALLATION SPECIFICATIONS Maximum DC system line voltage 24V dc Unit limiting DC current 40A dc Control input voltage range 0-5V dc Control input current @ 5V typical 1mA dc High frequency mode(no link across RT and RT1) 350Hz Medium frequency mode (link RT and RT1) 180Hz Optional for temperature control (terminals RT