RS Components 电工电料 电动机控制器 PM546 使用说明.pdfVIP

6 Amp Bi-polar drive module PM 546 Built on the 3U high International standard extended Eurocard format, the PM546 utilises surface mount technology for optimum space utilisation and reliability. With a width of only 34 mm ( 7E ) up to 12 units can be fitted in single 19 in. standard Euro-rack. Ideal choice for size 34 hybrid motors With adjustable current from 2.5 to 6 amps / phase, combined with chopped constant current drive technology which enables current forcing from supply voltages up to 85 Vdc, the unit provides high efficiency and optimum performance characteristics when using size 23 34 hybrid stepper motors. Advanced control features The PM 546 design is based on many years experience in stepper motor drive technology and incorporates the following features to provide flexible control: High efficiency chopped constant current power stage provides increased performance and reduced current consumption Single supply rail simplifies power supply requirements Short circuit and open circuit protected power stage for increased reliability. Selectable full or half step phase logic control Adjustable current settings from 2.5A to 6 Amps per phase Choice of automatic or externally selectable reduced current for stationary motor conditions to reduce power consumption and motor heating. Over-temperature monitor with selectable automatic drive shutdown. Opto-isolated ‘drive healthy’ status output Opto-isolated control inputs. Control from external clock and direction signals Alternative control using on-board voltage controlled oscillator featuring: externally gated adjustable base and high speed settings adjustable acceleration/deceleration ramping. choice of oscillator gating procedures to suit alternative control ph