RS Components 电工电料 霍尔效应传感器 SS496A1 使用说明.pdfVIP

Solid State Hall Effect Sensors High Performance Miniature Ratiometric Linear SS490 Series FEATURES • Small size (.160 x .118 in) • Power consumption of 7 mA at 5 VDC for energy efficiency • Single current sinking or current sourcing output • Linear output for circuit design flexibility • Built-in thin film resistors are laser trimmed for precise sensitivity and temperature The SS490 Series MRL (Miniature Ratiometric Linear) sensors are small, compensation versatile linear Hall effect devices which are operated by the magnetic field • Rail-to-rail operation from a permanent magnet or an electromagnet. The ratiometric output provides more useable voltage is set by the supply voltage and varies in proportion to the strength signal for higher accuracy of the magnetic field. • Temperature range of -40°C The integrated circuitry provides increased temperature stability and to +150°C sensitivity. Laser trimmed thin film resistors provide high accuracy (null to ± • Responds to either positive 3%, sensitivity up to ±3%) and temperature compensation. These linear or negative gauss position sensors have an operating temperature range of -40C to +150°C, • Quad Hall sensing element appropriate for industrial and automotive environments. They respond to for stable output either positive or negative gauss, monitoring either or both magnetic poles. The quad Hall sensing element minimizes the effects of mechanical or TYPICAL APPLICATIONS thermal stress on the output. The positive temperature coefficient of the • Current sensing sensitivity (+0.02%/°C typical) helps compensate for the negative • Motor control