RS Components 电工电料 控制继电器 K8AKPM2380480VAC 使用说明.pdfVIP

New Product Three-phase Voltage and Phase-sequence Phase-loss Relay K8AK-PM Ideal for Monitoring 3-phase Power Supplies for Industrial Facilities and Equipment. • Greater resistance to inverter noise. • Monitor overvoltages, undervoltages, phase sequence, and phase loss for three-phase 3-wire or 4-wire power supplies with just one Unit. Switch setting for 3-phase 3-wire or 3-phase 4-wire power supply. • Two SPDT output relays, 5 A at 250 VAC (resistive load). Output overvoltages and undervoltages using separate relays. • World-wide power specifications supported by one Unit (switchable). For the most recent information on models that have been certified for • Output status can be monitored using LED indicator. safety standards, refer to your OMRON website. Refer to Safety Precautions on page 10. Refer to page 8 to 9 for commonly asked questions. Ordering Information List of Models Rated input* Model 3-phase 3-wire mode 200, 220, 230, 240 VAC K8AK-PM1 3-phase 4-wire mode 115, 127, 133, 138 VAC 3-phase 3-wire mode 380, 400, 415, 480 VAC K8AK-PM2 3-phase 4-wire mode 220, 230, 240, 277 VAC Note: Three-phase 3-wire or 4-wire and the input range are switched using a DIP switch. * The power supply voltage is the same as the rated input voltage. ●Single K8AK Monitors 3-phase Power Supply with 3 or 4 Wires Monitoring Relays can be used to monitor 3-phase power supplies with 3 or 4 wires simply by changing DIP switch settings. Phase to phase voltage (3 wires) Phase to neutral voltage (4 wires) L1 L2 L3 L1 L2 L3 N 230VAC