RS Components 电工电料 控制继电器 2900177 使用说明.pdfVIP

/gb/products/2900177 Monitoring relay - EMD-FL-RP-480 - 2900177 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the users documentation. Our General Terms of Use for Downloads are valid (/download) Monitoring relay for effective power monitoring in 1- and 3-phase networks of 0...7.2 kW, underload, overload, window, motor winding temperature, error memory, supply voltage can be selected via power module, 2 PDTs Product Description Requirements pertaining to safety and system availability increase constantly – regardless of the industry. Processes are becoming more and more complex, not only in the mechanical engineering and chemical industry but also in system and automation technology. Demands on power engineering are also constantly on the rise. Error-free and therefore cost-effective operation can only be achieved through continuous monitoring of important network and system parameters. The electronic monitoring relays of the EMD series are available for various monitoring tasks. The operating states are indicated using colored LEDs, errors that may occur can be sent to a controller via a floating contact or can shut down a part of the system. Some device versions are equipped with startup and response delays in order to briefly tolerate measured values outside the set monitoring range.   Why buy this product  Temperature monitoring of the motor winding  Monitoring range up to 7.2 kW  Variable supply voltage range  Detection of switched off loads  Separately adjustable startup and response delays     Key Co ercial Data Packing unit 1 pc GTIN Weight per Piece (excluding packing) 321.4 g Custom tariff number