Roland罗兰乐器UA-25 USB Audio InterfaceUA-25 TurboStart支持文档.pdf

e UA-25 TurboStart Audio/MIDI Interface Welcome 11. When you see, “Has not passed the Windows Logo testing,” click “Continue Anyway.” Congratulations on your purchase of the Edirol 12. At the Insert Disk dialog box, click OK. UA-25. This TurboStart contains step-by-step 13. In the Files Needed Window’s “Copy files from” instructions to help you get your UA-25 ready to use. area, you can type in the location of the UA-25 driver, or copy and paste its file path—usually Before You Connect D:\Driver\XP2k—from Step 6 in the open SetupINF window . Before you make any connections, there are a few settings to make on the UA-25 itself. Note: If the SetupINF window isn ’t visible behind the 1. Set the ADVANCED switch located on the back Files Needed Window, move the Files Needed of the UA-25 to ON. Window out of the way so you can get to it. 2. Set the SAMPLE RATE Switch to 44.1. 14. After the Windows Logo test repeats—click Note: Don ’t connect the UA-25 before installing the “Continue Anyway” again. 15. Once the install has completed, click “Finish.” UA-25 driver software on your PC or Mac, as described below. 16. When the computer prompts you to restart, reboot your compute