RS Components 其他网络设备 充电控制器 MP2602DQ-LF-P 使用说明.pdfVIP

MP2602 28V, 1A Linear Li-Ion Battery Charger with Trickle Charge The Future of Analog IC Technology DESCRIPTION FEATURES The MP2602 is a linear, high-performance • Input Surge Up to 28V single cell Li-Ion battery charger. By integrating • Adapter or USB Input high voltage input protection into the charger IC, • Programmable Charge Current: 85mA to 1A the MP2602 can tolerate an input surge up to • Proprietary Constant Voltage Auto Recharge 28V. • Proprietary Over-Voltage Protection The device features constant current (CC) and • 0.75% VBATT Accuracy constant voltage (CV) charging modes with • 1µA Battery Reverse Current programmable charge currents (85mA to 1A), • 90µA Standby Current from VIN programmable battery full threshold, thermal • Battery Temperature Monitoring protection, battery temperature monitoring, • Over Current Protection reverse current blocking and trickle charge. The • AC Adapter Power Good Indicator device also provides AC adapter power good • Charge Status Indicator and charge status indications to the system. • Programmable Soft-Start MP2602 is available in 10-pin 3mm x 3mm QFN • Programmable Charge Termination Current packages.