Roland罗兰乐器TM-2 触发器音源[English] About the RT-30’s “Noise Cancel” Function用户手册.pdf

About the RT-30’s “Noise Cancel” Function If you are connecting an RT-30K or RT-30HR drum trigger to your TM-2, you can use the Noise Cancel function. Noise Cancel is a function that prevents the drum trigger from being unintentionally triggered by a sound of drum on which the drum trigger is not mounted, or by sound or vibration from an external source. * This function is only effective when you connect the RT-30K or RT-30HR to the TM-2 using a Roland recommended stereo connection cable. * The RT-30H does not support the Noise Cancel function. * Noise Cancel function does not work if the Input setting is set to “Padx2.” To activate the Noise Cancel function, set the Input setting to “HEADRIM.” RT-30K Adjusting the Noise Cancel function Normally, if you select the correct trigger types for the connected triggers (“RT-30K” or “RT-30HR”) on your TM-2, the optimum Noise Cancel value is automatically selected. Raising the TM-2’s “Noise Cancel” parameter value decreases the possibility of unintentional triggering. RT-30HR Please note that increasing the value of “Noise Cancel” parameter can also reduce the module’s response to intentional, low velocity ghost notes. Therefore, when adjusting this parameter, please choose the lowest possible value that both eliminates unwanted false triggering whilst still allowing dynamic playing. Copyright © 2015 ROLAND CORPORATION RT-30のノイズ・キャンセル機能について TM-2にドラム・トリガー「RT-30K」または「RT-30HR」をつなぐ場合は、「ノイズ・キャンセル機能」を使うことが できます。 ノイズ・キャンセル機能とは、ドラム・トリガーを取り付けていないドラムを叩いたときの音、または外部からの音や振 動によってドラム・トリガーが誤って発音することを防ぐ機能です。 ※ ノイズ・キャンセル機能を使う場合