STI半导体技术仪器iFocus Vision Manual V8.09.pdfVIP

iFOCUS Vision Inspection System Operation Manual, Version 8.09 (Original Instructions) iFOCUS VISION OPERATION MANUAL WARNING To ensure satisfactory and safe operation of this machine (as well as other equipment used with this machine), all applicable local and national codes must be followed. Since codes can vary internationally and with time, it is the users responsibility to determine which standards and codes apply and to comply with them. Failure to comply with applicable codes and standards can result in damage to equipment and/or serious injury to personnel. Personnel who install and operate the equipment should carefully study this manual and any other documentation referred to prior to installation and/or operation of the equipment. STI is constantly striving to improve its products. Therefore, this manual may not refer to the exact configuration of the machine that is in your possession. ATTENTION The information and inventions disclosed in this document and any and all patents which might be granted on such inventions, including software, are the exclusive property of Semiconductor Technologies and Instruments Pte Ltd. By accepting this document, you agree to use it solely for the purpose for which it was supplied. No reproduction or disclosure of this document, or the information obtained there from shall be made to or for the use of any other person, firm, or organization in any form whatsoever without the prior consent in writing signed by an authorized officer of Semiconductor Technologies and Instruments Pte Ltd, Singapore 339416. For additional informa