ZMD A SI Data Sheet Advanced AS-Interface IC说明书用户手册.PDF

A²SI Data Sheet Advanced AS-Interface IC 1 Features 2 Description AS-i Complete Specification V2.11 compliant A²SI is a monolithic CMOS integrated circuit certified Integrated EEPROM for AS-i (Actuator Sensor-interface) networks. AS-i Additional addressing channel using an opto- networks are intended for industrial automation. electronic interface Extended address mode operation as The main advantage of AS-i solutions is that actuators programmable option (up to 62 slaves) and sensors are connected using a two-wire High impedance AS-i line input, additional pins unshielded cable that is easy to install. This cable for further impedance optimizations transports both power and information/data. DC voltage output, approximately 24 volts, not AS-i network communication is based on the master- stabilized slave principle. The network can be extended (to 5 volt DC voltage output, stabilized, CMOS logic cable lengths greater than 100m) by using the A²SI in can be supplied directly (e.g. µC) the repeater mode configuration. LED status indicator output (compliant with the standard indication recommendation) AS-i is a standard for the automation industry based Integrated watchdog on IEC 620