Allegro A1185 A1186 DATA SHEET说明书用户手册.PDF

A1185 and A1186 Ultrasensitive Two-Wire Field-Programmable Chopper-Stabilized Unipolar Hall-Effect Switches The A1185 and A1186 are ultrasensitive, two-wire, unipolar Hall effect switches. The operate point, BOP, can be field-programmed, after final packaging of the sen- Package LH, 3-pin SOT sor and placement into the application. This advanced feature allows the optimiza- 3 tion of the sensor switching performance, by effectively accounting for variations 1. VCC caused by mounting tolerances for the device and the target magnet. 2. No connection This family of devices are produced on the Allegro MicroSystems new DABIC5 3. GND BiCMOS wafer fabrication process, which implements a patented, high-frequency, NC chopper-stabilization technique that achieves magnetic stability and eliminates 1 2 the offsets that are inherent in single-element devices exposed to harsh applica- tion environments. Commonly found in a number of automotive applications, the A1185 and A1186 devices are utilized to sense: seat track position, seat belt Package UA, 3-pin SIP buckle presence, hood/trunk latching, and shift selector position.