RS Components 电工电料 光耦 HFCPL-3150-500E 使用说明.pdfVIP

Data Sheet HCPL-3150 (Single Channel), HCPL-315J (Dual Channel) 0.5 Amp Output Current IGBT Gate Drive Optocoupler Overview Features The Broadcom® HCPL-315X consists of an LED optically  0.6A maximum peak output current coupled to an integrated circuit with a power output stage.  0.5A minimum peak output current This optocoupler is ideally suited for driving power IGBTs  15-kV/µs minimum Common Mode Rejection (CMR) at and MOSFETs used in motor control inverter applications. VCM = 1500V The high operating voltage range of the output stage  1.0V maximum low level output voltage (VOL) provides the drive voltages required by gate-controlled eliminates need for negative gate drive devices. The voltage and current supplied by this  ICC = 5 mA maximum supply current optocoupler makes it ideally suited for directly driving IGBTs  Under voltage lock-out protection (UVLO) with with ratings up to 1200V/50A. For IGBTs with higher ratings, hysteresis the HCPL-3150/315J can be used to drive a discrete power  Wide operating VCC range: 15V to 30V stage which drives the IGBT gate.  0.5-µs maximum propagation delay  ±0.35-µs maximum delay between devices/channels Applications  Industrial temperature range: –40°C to 100°C  Isolated IGBT/MOSFET gate drive  HCPL-315J: channel one to channel two output isolation = 1500 Vrms/1 min.  AC and brushless DC motor drives