LINKSYS PVC2300 High quality video surveillance platform with Power over Ethernet provides flexible installation说明书用户手册.PDF

High quality video surveillance platform with Power over Ethernet provides flexible installation PVC2300 Linksys Business Series Surveillance products provide customizable ways for small business owners to monitor and protect their companies. These high-quality solutions can be optimized for many different applications and sites. Each camera can be quickly mounted utilizing the bracket included in the package. Its compact form factor also enables the camera to be put inside a protective enclosure for interior or exterior installations. The camera uses removable CS-mount lenses and can be customized with optional zoom, wide-angle, vari-focal, auto-iris, or other type lenses as required for a specific application or setting. The PVC2300 is a Power over Ethernet (PoE) device so it can be powered from a PoE Switch or power injector via Ethernet cabling. This enables installations near ceilings on rooftops or anywhere where power outlets may not be available. The PVC2300 Camera can be mounted on any Pan-Tilt (PT) base that supports the Pelco_D protocol and can be remotely rotated and controlled through an RS-485 interface. The PVC2300 also has two input and two output ports which can be used to connect the camera to an alarm panel, siren, Passive InfraRed (PIR) sensors, smoke detectors, lighting switch (on/off), door sensors, etc. The PVC2300 uses a high-quality progressive scan CCD Sensor delivering good quality video. The CCD sensor also has low-light sensitivity so video can be captured even in very low light environments or during “near dark” times of day. Additionally, the camera incorporates an IR Cut Filter which, when used with a separate IR lamp, allows for video capture in total darkness. The PVC2300 Camera supports dual codecs (MPEG-4 and MJPEG). Both codecs can be used simultaneously. MPEG-4 gives efficient bandwidth consumption with good quality com