梁的建模创建框架结构.pptxVIP

1. 启动ANSYS并设置工作文件名“bldg 2. 选择FileRead Input from… ，找到文件“bldg-geom.inp”，读入后生成框架的几何模型;3. 依次定义3个工字型梁截面和一个箱型梁截面, 然后保存文件 Main Menu Preprocessor -Beam- Common Sectns … ID = 1, Name = column, Sub-Type = I W1 = 12, W2 = 12, W3 = 12.12, t1 = 0.605, t2 = 0.605, t3 = 0.39 [Apply] ID = 2, Name = girder, Sub-Type = I W1 = 10.425, W2 = 10.425, W3 = 16.97, t1 = 0.985, t2 = 0.985, t3 = 0.585 [Apply] ID = 3, Name = beam, Sub-Type = I W1 = 6.535, W2 = 6.535, W3 = 8.06, t1 = 0.465, t2 = 0.465, t3 = 0.285 [Apply] ID = 4, Name = peak, Sub-Type =  (hollow rectangle) W1 = 6, W2 = 6, t1 = 0.25, t2 = 0.25, t3 = 0.2