UL 1642 Training标准测试方法.docxVIP

1. 版本信息 UL1642: a) Fourth Edition, Dated September 19, 2005; b) Fifth Edition, Dated Mar.13,2012, 最新版本是第 5 版 2. UL1642 使用范围：一次或二次锂电池。包括： a) 金属锂，或者锂合金，或者锂离子； b) 单电芯，或者多电芯串并联，或者二者的结合。 3. 电池更换方式： a) Technician-replaceable batteries：Crush, Impact, Projectile 可不过，UL 会注明。 b) User-replaceable batteries：Crush, Impact, Projectile 必须过，特别是申请 UL2054 的 PACK 里面用到的电芯，Projectile 要求必须通过。 4. Precondition: charge-discharge cycling a) 针对 new model； b) 环境温度：25°C； c) 循环方法：充电 – 放电 –充电…… 以此不停循环； d) 循环次数或时间：25%的寿命，最长 90 天。 Secondary cells are to be conditioned at 25°C (77°F). Cells are continuously cycled as per the manufacturer’s specifications. The specification shall be such that the full rated capacity of the cell is utilized and the number of cycles accumulated shall be at least equal to 25 percent of the advertised cycle life of the cell or cycled continuously for 90 days, whichever is shorter. Cycling is to be done either individually or in groups. Cells are to be recharged prior to testing as indicated in Table 6.2 and Table 6.4. 5. 专业术语 a) Preconditioning is conducted on new model cells belonging to a group whose chemistries/constructions have not already been subjected to preconditioning. 6. 测试项以及样品： Test Programs for Cell (Base on UL1642 Ed.5) New Models ALT Models Test Programs Notes Fresh Cycled V1/V2/V4 V3 V10 Electrical Tests 5 5 Clause 10: Short-Circuit at room temp. 5 5 5 Clause 10: Short-Circuit at 55°C (131°F) 5 5 5 5 Clause 11: Abnormal Charge Clause 12: Forced-Discharge Test Mechanical Tests 5/10 5/10 5/10 5/10 Clause 13: Crush 5 samples for cylindrical or polymer cell 5/10 5/10 5/10 5/10 Clause 14: Impact 5 samples for cylindrical or polymer cell 5 5 Clause 15: Shock 5 5 Clause 16: Vibration Fire Exposure Tests 5/10 5/10 5/10 5/10 Clause 20: Projectile Another set(5 pcs) can be tested if the first set(5 pcs) failed Environmental Tests 10 10 10 10 Clause 17: Heating 5 5 Clause 18: Temperature Cycling 5 5 Clause 19: Low Pressure (Altitude Simulation) Additiona