OMRON欧姆龙 NX NJ系列控制器CPU单元内置以太网 IP端口用户手册.pdfVIP

Machine Automation Controller NJ/NX-series CPU Unit Built-in EtherNet/IP™ Port User’s Manual NX701-1£££ NX102-1£££ NX102-90££ NX1P2-1£££££ NX1P2-9£££££ NJ501-££££ NJ301-££££ NJ101-10££ NJ101-90££ CPU Unit W506-E1-29 NOTE 1. All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form, or by any means, mechanical, electronic, photocopying, recording, or otherwise, without the prior written permission of OMRON. 2. No patent liability is assumed with respect to the use of the information contained herein. Moreover, because OMRON is constantly striving to improve its high-quality products, the infor- mation contained in this manual is subject to change without notice. 3. Every precaution has been taken in the preparation of this manual. Nevertheless, OMRON as- sumes no responsibility for errors or omissions. Neither is any liability assumed for damages resulting from the use of the information contained in this publication. Trademarks • Sysmac and SYSMAC are trademarks or registered trademarks of OMRON Corporation in Japan and other countries for OMRON factory automation products. • Microsoft, Windows, Excel, Visual Basic, and Microsoft Edge are either registered trademarks or trademarks of Microsoft Corporation in the United States and other countries. • EtherCAT® is registered trademark and patented technology, licensed by Beckhoff Automation GmbH, Germany. • ODVA, CIP, CompoNet, DeviceNet, and EtherNet/IP are trademarks of ODVA. • The SD and SDHC logos are trademarks of SD-3C, LLC. Other company names and product names in this document are the trademarks or registered trade- marks of their respective companies. Copyrights • Microsoft product screen shots used with permission fro