EMERSON艾默生 Quick Start Guide Rosemount™ 2051G Pressure Transmitter with 4-20 mA HART® Protocol (Revision 5 and 7)说明书用户手册.pdf

Quick Start Guide 00825-0700-4101, Rev AD May 2019 ™ Rosemount 2051G Pressure Transmitter with 4-20 mA HART® Protocol (Revision 5 and 7) Quick Start Guide May 2019 Contents About this guide3 System readiness 5 Mount the transmitter6 Set the switches 9 Connect the wiring and power up10 Verify transmitter configuration13 Trim the transmitter19 Safety instrumented systems 22 Product certifications 23 2 E/Rosemount May 2019 Quick Start Guide 1 About this guide This guide provides basic guidelines for Rosemount™ 2051G Transmitters. It does not provide instructions for configuration, diagnostics, maintenance, service, troubleshooting, Explosion-proof, Flameproof, or intrinsically safe (I.S.) installations. See the Rosemount 2051G Reference Manual for more information. WARNING Explosions could result in death or serious injury. Installation of these transmitters in an explosive environment must be in accordance with the appropriate local, national, and international standards, codes, and practices. Review the approvals section of the Rosemount 2051 Reference Manual for any restrictions associated with a safe installation. Before connecting a HART-based communicator in an explosive atmosphere, make sure the instruments in the loop are installed in