RockwellAutomation罗克韦尔Dual-IP architectures with CompactLogix and Compact GuardLogix 5380 controllers用户手册说明书.pdf

Dual-IP architectures with CompactLogix ™ 5380 and Compact GuardLogix® 5380 controllers Gain greater flexibility to design small networks and systems Bruce Kyer, Commercial Project Engineer c Introduction This white paper provides an overview of CompactLogix™ 5380 standard and Compact GuardLogix® 5380 safety controllers with Dual-IP support and how it can help streamline your network architecture. The Dual-IP functionality allows segregated I/O network architectures, which enable greater flexibility in designing networks and systems. CompactLogix 5380 and Compact GuardLogix 5380 controllers can be configured to operate in Dual-IP mode, reducing network complexity and costs. Benefits of Dual-IP CompactLogix 5380 standard and Compact GuardLogix 5380 safety controllers have two built-in gigabit (Gb) Ethernet ports. These ports can be set for one of two modes of operation: ▪ Linear/DLR mode ▪ Dual-IP mode The Linear/DLR mode combines both ports on a single subnet and allows the controller to be included in Linear, Device Level Ring (DLR), or Star network. In Dual-IP mode, each Ethernet port is comparable to separate network interface cards (NICs) on different subnets. Routed CIP™ traffic is allowed to bridge these two ports and all other traffic is blocked, providing a level of separation between the two network interfaces. This can be used to create a segmented architecture that isolates network traffic. The choice to segment network areas can be used to organize the physical network structure logically. Cost savings can be achieved by simplifying the network design. Rockwell Automation 2 Dual-IP architectures with CompactLogix 5380 and Compact GuardLogix 5380 controllers Network architectures Let us look at various network architecture examples with Linear/DLR and Dual-IP configurations. A t