fluent中多孔介质模型的设置.docxVIP

7.19.6 User Inputs for Porous Media When you are modeling a porous region, the only additional inputs for the problem setup are as follows. Optional inputs are indicated as such. 1. 1. 2. 3. 4. Define the porous velocity formulation, (optional) Identify the fluid material flowing through the porous medium. Enable reactions for the porous zone, if appropriate, and select the reaction mechanism. Enable the Relative Velocity Resistance Formulation. By default, this option is already enabled and takes the moving porous media into consideration (as described in Section 7.19.6). 玖, Set the viscous r