Carrier开利Carlyle Semi-Hermetic Reciprocating Compressors 06D 574-067 06D Installation Start-up Instructions说明书用户手册.pdf

Installation Instructions 06D GENERAL must be relieved before attempting to remove any compres- 1. Inspect compressor for shipping damage and file claim sor fitting or part. with shipping company if damaged or incomplete. Relieve holding charge by removing the cap on the low pres- 2. Check compressor nameplate for correct model and sure connection fitting and depressing the internal disc. See voltage designation. Fig. 1 through 4 for applicable low pressure connection fit- ting location. 3. Before installation, review all Carlyle compressor appli- cation literature to assure yourself that the proper com- Service Valves pressor has been selected and is being applied in a proper manner. The required application literature is Remove valve pads and attach factory-supplied suction and available through Carlyle. discharge gaskets and service valves to the compressor. Torque 5/16-in. -18 mounting bolts 20 to 25 lb-ft (27 to 34 Nm) and 1/ -in. -13 mounting bolts 80 to 90 lb-ft (109 to SAFETY INSTRUCTIONS 2 122 Nm). When brazing piping to valve, wrap the valve