Peavey百威 210 HP Powered Enclosure用户手册说明书.pdf

210HP- POWERED ENCLOSURE OPERATING GUIDE AUTION TO PREVENT ELECTRICAL SHOCK DR FIRE HAZARD, DC NODT EXPOSE THIS INSTRU- MENT TO RAIN OR MOISTURE. BEFORE USING THIS INSTRUMENT, READ BACK COVER FOR FURTHER WARNINGS- severe clipping. associated Subwoofer is 250 Hz to 500 Hz. 1. MAIN POWER AMP INPUT Use to connect line level signal to Power amplifier. 时 息 号 2. AUXILIARY POWER AMP INPUT Use to send line level signal to additional power amplifier (DAISY CHAIN). Will not operate unless 国 国 main input is Connected. 3.， LEVEL Lewn.avp Controls the volume level of the enclosure. INPUTS YY Me 4. LINE CORD For your safety, we have incorporated a 3-wire line (mains) cable on the back of the chassis with Proper 300 WATTSZ2 DHMS grounding facilities. ltis not advisable to remove the 210 WATTS74 DHMS 合 加 ground pin under any circumstances. If it is neces- Sary to use the amplifier without proper grounding POWER facilities，suitable grounding adapters should be 800 WATTS ON FUSE used. Less noise and greatly reduced shock hazard exists when the unit is operated with the proper grounded receptacles. NOTE: The above statement in referenceto removingthe ground pin is applicable only to 120 volt model products. 220 vv DFF 4AMP 5，POWER SWITCH 名 国 富 Center position is “OFF.” Two “ON”positions are provided，one of which will properly ground the CAUTION amplifier Switch to the“on side that