Manual VXR Version 2.2原版标准完整.docxVIP

Video XR Version 2.2 Video XR Version 2.2 M a n u a l Video XR CCIR Video XR EIA PAGE PAGE 3 PAGE PAGE 10 Table of Contents Technical Description 4 Performance Data for Lenses 5 Performance Data for Mechanics 7 Performance Data for Electronics 8 Operating Concept 9 Camera Command List 10 Commands related to Camera Identification and System Status 10 Commands related to Gain Control 11 Commands related to the Video Signal 13 Commands related to Shading Correction 13 Commands related to Circular Blanking 14 Commands related to Automatic Balance Control 15 Commands related to X-Ray-Mode 17 Commands related to I/O Control 17 Commands related to Line Generator 18 Circuit Description 19 Charge Coupled Device 19 Analog Front End 19 Digital Timing and Process Unit 19 Microcontroller 21 Automatic Balance Control 22 Power Supply 22 Block Diagram VXR-Camera 23 Block Diagram ABC Circuitry 24 Operation Modes 25 Continuous Mode 25 Pulsed X-Ray Mode 26 CONNECTORS for I/O Signals 33 Specification of I/O Signals 36 Technical Description The CCD Camera Video XR is used to reproduce the image of an image intensifier on a CCD sensor. With the CCD Camera, the partial components of optics, mechanics and electronics are combined to form an optimised unit for X-ray diagnostics. The system has a modular design in all three partial areas so that it is always possible to update the system to the state of the art at a later date. To keep the adjustment work on the image intensifier as low as possible when the CCD Camera is mounted, the individual components are already set in the factory. The lens has been optimised for different reproduction scales, i.e. the CCD Camera can be used on a number of image intensifier tubes without replacement of the lens. The image quality remains almost constant in this process. The mechanics offer a series of options such as motor-driven iris and image rotation specially designed for the demands of