ABB Data sheet Machine Sync 数据表(英语)说明书用户手册.pdf

Machine Sync Software for increased productivity Saving seconds be applied for machine tending and material handling Saving time is saving money, and when it comes to in general, and especially for injection moulding, die reducing the time needed for opening and closing casting, machine tools and press tending. machines for extraction, the seconds saved can be substantial. Machine Sync, based on long experience Early enter of robotised machine tending, further increases the When Machine Sync is used, the workflow of robot output of robot production by coordinating the opening and machines overlap to save time. With Machine and closing of the machine, thereby reducing cycle Sync, as soon as there is enough space for the robot time. Furthermore, by synchronising the opening and between the machine platens at machine opening, closing, robot wear will be reduced and collisions can the sensor triggers the robot to start to move into the be avoided. machine, synchronised with the moving platen of the machine. Time is saved by the robot entering early. Easy to program Machine Sync is easily configured with ABB’s RAPID Early closing programming language. Machine Sync is compatible At mould closing, the robot starts to move out of the with the ABB’s Euromap/SPI to guarantee redundant machine as soon as the moulded part has been grip- machine-robot safety based on international standards. ped. When the robot has reached the machine closing Machine Sync allows for easy robot programming and point on its synchronised path, the machine starts to operation, a state-of the-art system is achieved in opti- close. The machine closes safely while the robot moves mised cycle time and ease-of-u