SRNE硕日 HF24 U-100系列英文说明书.pdfVIP

All-in-one solar charger inverter User Manual Product models: HF2420U60-100 | HF2430U60-100 All-in-one solar charge inverter V7.0 1 Important safety instructions Please keep this manual for future use. This manual contains all safety, installation and operating instructions for the HF Series all -in-one solar charge inverter. Please read all instructions and precautions in the manual carefully before installation and use.  Non-safety voltage exists inside the all-in-one solar charge inverter. To avoid personal injury, users shall not disassemble the all-in-one solar charge inverter themselves. Contact our professional maintenance personnel if their is a need for repair.  Do not place the all-in-one solar charge inverter within the reach of children.  Do not install the all-in-one solar charge inverter in harsh environments such as moist, oily, flammable or explosive, or heavily dusty areas.  The mains input and AC output are high voltage, so please do not touch the wiring terminals.  The housing of the all-in-one solar charge inverter is hot when it is working. Do not touch it.  Do not open the terminal protective cover when the all-in-one solar charge inverter is working.  It is recommended to attach proper fuse or circuit breaker to the outside of the all-in-one solar charge inverter.  Always disconnect the fuse or circuit breaker near the terminals of PV array, mains and battery before installing and adjusting the wiring of the all-in-one solar charge inverter.  After installation, check that all wire connections are tight to avoid heat accumulation due to poor connection, which is dangerous.  The all-in-one solar charge inverter is off-grid.