Peavey百威 Impulse 500 Stacking Adapter Instruction Sheet用户手册说明书.pdf

® Impulse 500 Stacking Adapter The Impulse® 500 Stacking Adapter is designed for free-standing enclosures only. Do not attempt to use this adapter with enclosures that are flown or wall mounted. Do not attempt to stack more than two enclosures. Follow instructions for installation as shown in the diagram below. Use extreme care when picking the location or placement of any stackable enclosure. Stacked cabinets should only be used on solid level surfaces and away from possible direct or accidental contact. Any cabinets used in a stacked manner above floor level should be safety secured from above to prevent falling. Do not attempt to move, transport, or change the placement of these enclosures while in a stacked configuration. Failure to follow the advice above could result in personal injury. 1. Set Peavey number 2. Set feet of speaker to be or stacked in holes of stacking stacking adapter on top of adapter. bottom speaker as shown in this view. ISOMETRIC VIEW SIDE VIEW Features and specifications subject to change without notice Peavey Electronics Corporation • 711 A Street • Meridian • MS • 39301 (601) 483-5376 • FAX (601) 486-1278 • ©2000 Printed in the U.S.A. 3/00