Cambium Networks 50450M 5GHz Point to MultiPoint Multi User MIMO Access Point User Manual 450 Platform User Guide说明书用户手册.pdf

Chapter 6: Installation This chapter describes how to install and test the hardware for a 450 Platform link. It contains the following topics:  ODU variants and mounting bracket options on 2 provides details of six different bracket options, including the type of ODU and range of pole diameters supported by each option.  Mount the ODU, LPU and surge suppressor on 3 describes how to mount and ground an integrated or connectorized ODU, how to mount and ground the top LPU.  Installing the copper Cat5e Ethernet interface on 17 describes how to install the copper Cat5e power over Ethernet interface from the ODU to the PSU.  Installing external antennas to a connectorized ODU on 21 describes how to install external antennas for a connectorized ODU.  Installing ODU on 56 describes how to install PTP and PMP ODU radios.  Installing the AC Power Injector on 61 describes how to install a power supply unit for the PMP/PTP 450 platform, either the AC Power Injector.  Supplemental installation information on 64 contains detailed installation procedures that are not included in the above topics, such as how to strip cables, create grounding points and weatherproof connectors. Note These instructions assume that LPUs are being installed from the 450 Platform Family LPU and grounding kit (Cambium part number C000065L007). If the installation does not require LPUs, adapt these instructions as appropriate. If LPUs are being installed, only use the five black-capped EMC cable glands supplied in the LPU and grounding kit. The silver-capped cable glands supplied in the ODU kits must only be used in 450 Platform installations which do not require LPUs. 1 Chapter 6: Installation ODU variants and mounting bracket options O