ASME PCC-1-2022压力边界螺栓法兰连接安装指南.pdf

Pressure Boundary Bolted Flange Joint Assembly AN AMERICAN NATIONAL STANDARD Pressure Boundary Bolted Flange Joint Assembly AN AMERICAN NATIONAL STANDARD � The American Society of � Mechanical Engineers Two Park Avenue • New York, NY • 10016 USA Date of Issuance: September 30, 2022 This Standard will be revised when the Society approves the issuance of a new edition. ASME issues written replies to inquiries concerning interpretations of technical aspects of this Standard. Interpretations are published on the Committee web page and under /lnterpsDatabase. Periodically certain actions of the ASME PCC Committee may be published as Cases. Cases are published on the ASME website under the PCC Committee Page at /PCCcommittee as they are issued. Errata to codes and standards may be posted on the ASME website under the Committee Pages to provide corrections to incorrectly published items, or to correct typographical or grammatical errors in codes and standards. Such errata shall be used on the date posted. The PCC Committee Page can be found at /PCCcommittee. There is an option available to automatically receive an e-mail notification when errata are posted to a particular code or standard. This option can be found on the appropriate Committee Page after selecting Errata in the Publication Information section. ASME is the registered trademark of The American Society of Mechanical Engineers. This code or standard was developed under procedures accredited as meeting the criteria for American National Standards. The standards committee that approved the code or standard was balanced to ensure that individuals from competent and concerned interests had an opportunity to participate. The proposed code or standard