Schneider Electric施耐德S84311BP安装和用户指南(英语).pdf

MOUNTING INSTRUCTION 1 Connect the wires to the terminals {recommend to leave 60-80mm bare metal wire) and tighten the terminal screws. 2. Screwthe grid plate onto the wall box (suggest to keep minimum 75mm from engage surface of grid plate to bottem surface of wall box， 3.Snap the surround onto the grid plate. Complete engagement of the clip ScpnRidst locks isindicated by a clear click sound。 Mouting Screw APPLICATION GUIDE Full-Flat Press Switches CAT. NO. 一 一 Surround S8431BP Inserta screwdriverinto the clip lock, andtwistthe screwdriver to remove S8431TP the surround- MS18678 Thank you for choosing Schneider Electric ZENcelc Full-Flat Press Swicth, To IMPORTANT NOTE ensure properapplication of our products, please read through the following 1. “Ondicator for clear On/off statusindication - Marigold color for on information before installation and use.