ANALOG DEVICES AB-111 数据手册说明书.pdf

ANALOG AB-111 DEVICES APPLICATION BRIEF Wien bridge oscillators have the advantage of requiring only As a design example, consider one op amp, and this advantage is particularly important for Ci = Caz= 0.01nF R4 = 10kQ battery-operated applications.This oscillatorcircuit operates R1= 15.8kn Rs= 40k0 nominally from a single 9V battery. 2R2 = 31.8 Diodes = 1N914 or 1N4148 R3= 50kQ Rs=1MO The conditions for Wien bridge osciliation are Using these component values, fo will be 1004Hz. Resistor Rs must be adjusted forbest amplitude stabjlity. If Rsis too low, 1-RiRzCiCawo2=0and the oscillation might convergei iftoo [arge,thenthe oscillation willtdiverge until the output clips. An oscillation output of 6V Ra2 Cl RCI+RzCorTRIGT 一 有 peak-to-peak When operating from a 9V battery is recom- mended，Resistor Rs5 needs to be a nominal 40kO with a where Bistheratio ofoutputvoltage feedback to the inverting 士 2.5kQ adjustment range， input if R1= Razand Ci1= Ca then wois TVRC and pis 1/3， The OP-22isoperated with a 1MO setresistorforasetcurrent This osciliator should be set to just diverge in amplitude. of 7.84A which corresponds to a supply current of approxi- Diodes are usedto obtain anonlinearfeedback characteristic mately 100uA, Gain-bandwidth