Schneider Electric施耐德INSTRUCTION GUIDE concerning the use of M340 and M580 Industrial Programmable Controllers for applications in potentially explosive atmosphere安装和用户指南(英语).pdf

ATEX / IECEx INSTRUCTION GUIDE concerning the use of M340 and M580 Industrial Programmable Controllers for applications in potentially explosive atmosphere (zones 2/22) *HRB3244005* INSTRUCTION GUIDE concerning the use of M340 and M580 Industrial Programmable Controllers for applications in potentially explosive atmosphere (Zones 2/22) Schneider Electric 8ème rue, ZI Carros F- 06516 Carros cedex Type examination certificate: INERIS 14ATEX3025X IECEx Certificate of Conformity: IECEx INE14.0070X SAFETY INFORMATION Read these instructions carefully, and look at the equipment to become familiar with the device before trying to install, operate, or maintain it. The following special messages may appear throughout this documentation or on the equipment to warn of potential hazards or to call attention to information that clarifies or simplifies a procedure. The addition of this symbol to a Danger safety label indicates that an electrical hazard exists, which will result in personal injury if the instructions are not followed. This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death. DANGER DANGER indicates an imminently hazardous situation, which, if not avoided, will result in death or serious injury. WARNING WARNING indicates a potentially hazardous situation, which, if not avoided, can result in death, serious injury, or equipment damage. CAUTION CAUTION indicates a pot