基恩士 IV2 系列 开始指南 [控制面板篇] EN.pdf

96M16197 Copyright (c) 2019 KEYENCE CORPORATION. All rights reserved. 16196GB 2010-1 96M16197 Printed in Japan Vision Sensor IV2 Series Starting Guide (Control Panel) The starting guide explains the basic contents from how to set the IV2 Series to how to start the operation. For each function detail, refer to “IV2 Series User’s Manual (Control Panel)”. yYou can download the User’s Manual from the KEYENCE web site (/). Operation flow Mounting, Connecting, and Wiring the Sensor with the Control Panel Mount the sensor and control panel, and then connect and wire the cable. Turning on the power Turn on the power of the sensor and control panel, and then perform the initial startup process. “Operation when the Power is Turned on” (Page 3) Settings Navigator Create the program to be used for operation in [Settings Navigator] (Sensor Setup). STEP 1: Setting of image optimization Set the image optimization settings for clearly imaging a target. Adjust the image settings to clearly define the differences between an “OK” and “NG” image. Set the trigger options, adjust the brightness and camera focal distance. “STEP1 Setting Image Optimization” (Page 5) STEP 2: Registration of a master image Image an “OK” image and register the master image to serve as the reference of judgment. “STEP2 Registering the Master Image” (Page 6) STEP 3: Learning settings/Tool settings Performs settings to judge a target. yLearning settings (IV2-G30F only) Set the detection window and learn from various images to judge OK/NG. The target OK/NG will be judged based on the learning results. Up to 16 detection windows and 1 position adjustment w